Share this content
High performance, up to date technology, cost effectiveness in a Customer oriented coextrusion line
The increasing request for machines dedicated to the production of innovative plastic film,technologically advanced and economically advantageous, is the basic criterion for the development of the new INNOEX Coextrusion Centre machines. The production of high-quality film requires:
- a continuos avant-garde evolution of the basic technology regarding screws and extrusion heads, cooling rings and systems for internal bubble cooling, haul off and winders;
- an always more complete and efficient process control;
- the details’ care in every production phase: from the project choices up to the selection of the materials’ components and treatments, from the assembling up to the installation, from the start-up to the assistance service all along the machine’s life.
These elements, all together, guarantee the production of planar and smooth film, with controlled thickness, with severe and repetitive optical and mechanical features, with defined and constant width, winded up layer per layer at the correct tension in order to produce reels with cylindrical geometry, planar sides and without creasing.
Process control
The operator’s interface is graphic, intuitive and multilingual.
Every component is continuous(ly) monitored through a PLC.
Set Point of temperature and speed, gravimetric dosing, linear weight control, thickness profile, start-up and turning-off ramps, recipes management, reports, management of events and alarms are the typical performed functions.
The remote connection through LAN is standard.
LSW winder
Today the LSW winder is available in various useful widths, motorizations and configurations.
The classic disposition is double winder back to back. On choice, the machine can be supplied single or front to front.
Peripheral winding, peripheral with assisted centre and gap.
The reel formation takes place on horizontal guides so that the contact pressure is not influenced by weight’s components of the reel itself.
A dancer system grants the constancy of the winding tension and the speeds’ synchronization.
CR400/650 air rings and IBC
The dual lip technology allows to obtain big air volumes without jeopardising the bubble stability, resulting in an increase of hourly output and improvement of thickness profile. When adding the IBC internal bubble cooling system, the cooling efficiency will result to be improved, giving to the film a major transparency.
Hourly production per diametrical mm of die : 1,3 - 1,4 [Kg / (mmxh)].
Bubble stability with blow ration from 1,2 up to 3,5 and more.
(Special inserts on demand for specific dedicated productions).
Optional thickness control system with closed air ring.
The points of strength of the machine
- 3 layers extrusion head CBH 500/700 with radial distribution;
- Employment of forged materials to prevent deformations due to thermal cycles;
- Project of channels and spirals assisted by a program of flows calculation for the employment of a wide range of materials. Shear rate optimized to prevent the incrustations, reduce the residence time and speed - up the structure ‘s changes. Uniform flow’s distribution inside the spirals in order to obtain a reduced variation of the film thickness.
- Surfaces of slide chromed to thickness.
- Interchangeable male. Warming male.
